HARDWARE

The sensor

The Capto Putting sensor is designed to be lightweight and easy to use. The sensor along with the App are the core of the Capto Putting System. Install it on the putter, launch your app and you are ready to go!
Technical characteristics:
High frequency data capturing: up to 400 Hz;
Wi-Fi connection @ 2.4GHz and 5GHz;
It can work indoor and outdoor up to 50 meters from the base;
Easy & quick set up;
Light & small to travel with;
Dimensions: 5,4 cm x 3,8 cm
Weight: 62 grams
Sensor placement: on the putter’s shaft (below);
MSE (Mean Square Error) accuracy 
is of 0,1 degrees.

SOFTWARE


Capto App

The App along with the sensor are the core

of the Capto Putting System.


Capto App is compatible with Windows,

MacOSX, Android and iOS

(System Requirements: 2 GB Ram)


You can use one sensor with all your devices (unlimited), and share the data between them with an unique cloud database.

The software interface is the same for all devices.

The data provided by the sensor allows to measures over 40 parameters.

 

Calibration Tool

The Calibration Tool is specifically designed to work along with the CAPTO putting system. It allows you to install the sensor on the putter correctly in order to measure data in the optimal way. It can be used during the calibration phase in the App .This tool is included in the core of the CAPTO Putting System.
It can be purchased in our online store CAPTO bundle.

Loft-Lie Meter

This tool is specifically designed to work along with the CAPTO putting system
It allows to measure the putter loft and lie.

It can be used to to perform the loft lie calibration in the App.This tool is included in the core of the CAPTO putting system, it can be purchased in our CAPTO store bundle.

 

FAQ

Which are the sensors used by Capto?

Capto is equipped with nine measurement sensors and five calibration sensors. The measurement sensors are 3 magnetometers, 3 gyroscopes and 3 accelerometers. The calibration sensors are 3 thermometers, a barometer and a hygrometer. The latter are used to adjust the measurements as the environmental conditions change. Capto is equipped with a powerful calculation processor that performs on-board processing of the most significant quantities and the first step of the sensor-fusion algorithm.

What are the accuracy of Capto sensors?

The accuracy of Capto's sensors is very high. For the magnetometer is 5 micro Tesla, for gyroscope is 5 hundredths of a degree per second, for the accelerometer, better than 5 thousandths of degree. This means that it is possible to obtain the estimates of the quantities derived with great precision.

 
 

Phone at +39 338 2806914

HQ 

Loc. Tregozzano 87 52100

AREZZO, TUSCANY , ITALY

 

Laboratory     

Via Lumiére 19

52100 AREZZO, TUSCANY , ITALY

©2020 by My Site. Proudly created with Wix.com